mso-fareast-language:ZH-CN">SFT S1-2060 Ball Pressure Tester

Application ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

The 宋体;mso-fareast-language:ZH-CN">SFT S1-2060 Ball Pressure Tester is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics.



In this test, a conditioned specimen is placed on a preheated support and subjected to a force of 20N applied through a 5mm steel ball. The test stand, specimen and loading device are then kept in an oven at an elevated temperature for an hour. After the hour, the loading device is removed from the sample, the sample is cooled and any indentation is measured. It is important to assure that the test stand has reached a stable elevated temperature as required by the test. For this reason, the SFT Ball Pressure Tester comes equipped with a thermocouple that inserts into the test stand so its temperature can be monitored. mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN"> 

Instrument ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

The 宋体;mso-fareast-language:ZH-CN">SFT S1-2060 Ball Pressure Tester is made to the specifications of IEC 60695-10-2 and other similar international standards. The Tester comes with interchangeable components to allow the user to select their testing preference to Figure 1a or Figure 1b of IEC 60695-10-2. In either configuration, the total force of the loading device is 20N±0.2N. In the case of using the 5mm ball, the mass of the ball is included in the total force.



The base is supplied with a thermocouple so the user can ensure it has stabilized at the correct temperature in the oven prior to placing the specimen on it and adding the loading device. This is also a recommended feature in the IEC standard that many devices do not offer.



Additional features of the S mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">FT Ball Pressure Tester kit are the included pair of insulated gloves and a stand for the pressure device. These are needed at the end of the test for the removal and storage of the pressure device when it is still hot. The S ZH-CN">FT kit also includes a 2mm check gauge that can be used to see if the specimen indentation passes or fails. mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN"> 

Features ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">---Nickel plated steel materials for good thermal stability

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">---Ball holder with bore and clamping screw for the bow

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">---Precision 5mm pressure ball (according to ISO 3290)

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">---Thermocouple for the test stand mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN"> 

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN"> 

宋体;mso-fareast-language:ZH-CN"> 

Conforms To: ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

IEC60695-10-2(2003), 宋体;mso-fareast-language:ZH-CN"> IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1. GB 2099.1, GB4706.1

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN"> 

Specifications ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

Ball Diameter :Ø5mm ±0.05mm

Ball Pressure :20N (includes loading device and ball)

Test Stand :100mm high x 50mm diameter 宋体;mso-fareast-language:ZH-CN">

Ordering Information ZH-CN">

宋体;mso-fareast-language:ZH-CN"> 

mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">SFT S1-2060  Ball Pressure Tester

Includes:

1 Test specimen support

1 Thermocouple

1 Pressure ball 5mm (IEC60695-10-2(2003) Figure 1a)

1 Pressure ball mso-fareast-font-family:宋体;mso-fareast-language:ZH-CN">2.5mm (IEC60695-10-2(2003) Figure 1b)

1 Pair of insulated gloves

1 2mm check gauge

1 Storage stand for loading device