OnAccess 1024M is a configurable 24-port managed layer 2 Optical
Ethernet Switch, which offers up to 24 configurable and modularized
100Base-FX or 10/100Base-TX ports for flexibility and fast connection
speed. OnAccess 1024M allows administrators to configure features,
monitor performance, and troubleshoot the switches using a standard
Web browser SNMP-based network management platforms.

Features and specifications:
1) Non-blocking store-and-forward shared-memory architecture with an
8.8Gbps switching capacity and an efficient self-learning and
address recognition mechanism enables the forwarding rate to
proceed at full wire speed
2) A range of configurable copper and fiber modules to meet the
requirements of various applications, such as FTTH, optical LAN,
Ethernet based DCS and security surveillance systems, etc.
3) 14K / 10K / 8K / 6K address table for auto-learned unicast or static
unicast/multicast addresses
4) 7 trunk groups of up to 4 member ports within 26 ports, with flexible
load distribution control and fail-over function
5) Static priority and 802.1p class of service with 2-level priority
6) 802.1d multiple spanning trees
7) 802.3x flow control for a full-duplex mode and collision-based
backpressure for a half-duplex mode
8) Port-based VLAN and 802.1Q tag-based VLAN with 255 VLAN groups
9) Head of line (HOL) blocking prevention
10) Static MAC addressing and filtering
11) Port mirroring
12) Source-port-based, destination-port-based, and source-destination
-pair-based Sniffer functions
13) By-port Egress/Ingress bandwidth management control
14) IP Multicasting with IGMP snooping and an IP multicast table of
256 entries
15) Broadcast storm filtering
16) Network management:
a) In band: SNMP, web-based HTTP and Telnet
b) Out of band: RS-232 console
17) Network protocol and standards:
a) IEEE: 802.3, 802.3u, 802.1d, 802.1p, 802.1q, 802.1v, 802.1ad,
802.3x
b) IEFT:
i) RFC 1157 SNMP
ii) RFC 1112 / 2236 IGMP
iii) RFC 854 Telnet
iv) RFC 1123 / 1493 / 1643 MIB