Manual Operate Screw Jack detailed informations:

A hand wheel is a convenient solution for manual operated a screw jack or screw jack systems. When using screw jacks in intermittent positioning applications. Hand wheels are available in a range of diameters from 5 to 12 inches and customized follow clients' need.

Hand Wheels do not include a brake. Hand wheels are not recommended for use with ball screw jacks. When using hand wheel with a screw jack that can backdrive an additional locking mechanism may be required to prevent "creep".

For precise position display, a range of digital counters are available for use with screw jacks. These digital counters measure the rotation of the input shaft and display corresponding position in a counter window. The display value per input shaft revolution is variable and is achieved through a series of gear reductions configured to accommodate different jack ratios, lifting screw pitch and travel distances.

Human Force Calculation Formulas:

HF=(G*P)/(R1*R2)

HF:human force (kgs)

G :working load (kgs)

P :screw pitch (mm)

R1:gear ratio

R2:hand wheel radius

Example, working load 50 kgs,the fast speed,manual operated.

Check specification table, 50 kgs with manual operated, use the smallest model RN-0.5T(pitch=5mm) enough. Fast speed

1/5.Usually,RN-0.5T jack with 5"(125) diameter hand wheel. How much about human force?

HF=(50*5)/(5*62.5)=0.8 kgs.

Every model has three speed ratios.

RN-0.5T,RN-1T,RN-2T,RN-3T,RN-5T,RN-10T and RN-15T

Fast speed: 1 turn 1 mm travels

Mid  speed: 1 turn 0.5 mm travels

Low  speed: 1 turn 0.25 mm travels

The larger models screw jacks are not suitable for manual operated.

Did Projects:

Sluice gate in hydroelectric dam,Powered straighteners,Precision levelers,Solar tracking jack systems,Large satellite dish antenna movements,Slitting line,Roll forming machines,Tunnel freezer systems,Oven lifters,Vacuum furnace lid lifters,Conveyor lifts,Air dampers,Theatre stages,Glass charging machines,Steel manufacturing mills,Cold/Hot rolling mills,All tube mills.