Model HT816R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1.2km using Category-5 Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model HT801T/HT804T+HT816R allows long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.
MDL
|
HT816R 16CH Receiver |
Des
|
Distance:1000-3000ft
Lightning Surge Protection
PWR:+220v
Cable: CAT5/5E up
24AWG(Φ0.5)or higher |
16 Channel Video Receiver/Hub – Metal Housing
– BNC-F video signal connector
– 3.8mm screw connector
– BNC impedance: 75 ohms
– UTP terminal impedance:100± 20 ohms
– Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm)
– Category Type: Cat 2 or better
– Differential Capacitance:19 pF/ft max (62 pF/m max)
– DC Loop Resistance:52 ohms per 1,000 ft (18 ohms per 100 m)
– Frequency responding: DC-8MHz
– Build in video filter, anti-jamming design
– Each channel in 4 position range code switch for gain and EQ synchronization
– Lightning and surge protection
– Compatible: NTSC,PAL,SECAM,CCIR
– CMRR: >78dB typ.
– Figure enhanced output
– Power LED indicator
– Power Supply: 220V or 110V, AC
– Working temperature: -20℃-70℃
– Size: Standard 1U,19”