3 in 1 out HDMI switcherHDMI Version 1.3b

With IR, RS232 Control, IR Extension

Size:322mmW x 31mmH x 160mmD

FEATURES

1. Compact size.

2. No need of remote.

3. Auto selecting any active input signal to the output.

4. Signaling rates up to 2.25Gbits in support of 1080P display.

5. 8dB receiver equalization to compensate for 5m HDMI cable losses.

6. 3dB driver pre-emphasis to compensate for PCB losses.

7. Each port supports HDMI or DVI inputs.

8. HDCP compliant

TKI's TK-HS1231 is a three-input HDMI switcher. It switcheres the three HDMI inputs to the output. These three inputs are auto switching.(Smart function)

TK-HS1231 has the ability of equalization and amplification to ensure HDMI signal’s transmission through long cable without quality loss.

TK-HS1231 offers solutions for residential consumers, HDTV retail and show site, HDTV, STB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

CONNECT AND OPERATE

1) Connect the HDMI input sources such as：HD-DVD、PS3、STB etc.）into TK-HS1231.

2) Plug in the power (If necessary).

3) Connect the HDMI output( such as : HD-LCD、HD-DLP）into TK-HS1231.

4) Power on the input source you want to show. (Keep the unused inputs power off, otherwise they may interfere the normal display.)

5) Power on the display.

（Remark：Manual selection button can be used when the user want to select the source manually. In most cases the power adapter could be taken off. The power adapter is only needed when the signal source has no sufficient power driving ability.）

* Smart Function：When there are more than one sources connected to the switcher. The user should leave the desired source on, the others off. Then the switcher will choose this source automatically and sending the signal to the display. If several sources are all powered on, the last powered source will be chosen. Because of this character, user could use the method of power off/on the source to choose the desired signal.