運揚有限公司 WANCO LIMITED
Hipot Tester for simplified test
Hipot Tester for simplified test
TOS8030
2017-04-22 10:31
2017-05-06 10:42
Product Description
Hipot Tester for simplified test
高壓測試儀(簡化測試)
Model : TOS8030
The Kikusui TOS8030
* Specification
Remote control
Connector 5-pin DIN connector on the rear panel
Optional devices connectable Remote control boxes: RC01-TOS and RC02-TOS / High-voltage test probes: HP01A-TOS and HP02A-TOS
Signal I/O
Connector (Status signal output) 14-pin screw-less terminal on the rear panel (Output of a READY signal / H.V ON signal / PASS signal / FAIL signal/ PROTECTION signal )
Environment
Operation environment Indoor use, Altitude : Up to 2000 m
Temperature Specificationsassured range : 5°C to 35°C, Operating range : 0°C to 40°C, Storage range : -40°C to 70°C
Relative humidity Specificationsassured range, Operating range : 20% to 80% (with no dew condensation), Storage range : 90% or less (with no dew condensation)
General Specifications
Nominal input rating(Input voltage range) 220 V (200 V to 240 V) or 100 V (90 V to 110 V), 50 Hz or 60 Hz
Power consumption At no-load (in READY state) 10 VA or less
At rated load 50 VA maximum
Insulation resistance AC INPUT to chassis 30 MΩ or more (at 500 Vdc)
Withstand voltage AC INPUT to chassis 10 mA or less when 1390 Vac is applied for 2 seconds
Ground bond 25 Aac/0.1 Ω or less
Dimensions (maximum) 160 [6.30 inch](170[6.69 inch]) W × 132 [5.20 inch] (155[6.10 inch]) H × 230[9.06 inch] (270[10.63 inch]) D mm
Weight Approx. 6 kg(Approx.13.23 lbs)
Standard accessories High-voltage test leads TL01C-TOS (approx. 1.5 m): 1 set, Power cord: 1, INTERLOCK jumper: 1, Operation Manual: 1 copy